1-844-477-7707 (US only)

(920) 684-4990 (International) Contact Us

Easy Ordering...............Fast Shipping Grey Outline of truck with speed lines

You have no items in your shopping cart.

menu
PT-44AHC

Product image is only a representation, actual product appearance may differ slightly

  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • PT-44AHC
  • BobCAD-CAm

Description

 Now Includes Water Table Insert!  You now have your choice of what smaoke containment system to use.  Both Downdraft and water bath are now included with each purchase!

With variable height control, the PT-44AHC makes perfect cuts in uneven material. This CNC plasma table comes assembled with a heavy steel frame and includes design software.

 

  • 4’ x 4’ working area.
  • Runs on 220-volt single-phase power, so it will work at most sites in North America.
  • Customers love the design software package (more details below), which takes just a few minutes to learn.
  • You can control the X, Y, and Z axes using the integrated panel on the podium.
  • Automatic height control is integrated into the operator’s panel, eliminating secondary systems found on many other tables.
  • If the material is uneven or puckers under the heat of the torch, the variable height control will rise or lower in real time while cutting.
  • X, Y, and Z axes are controlled by quality stepper motors, allowing for fast and fluid movement.
  • Fully enclosed wires and electronics prevent snags and tangles.
  • Made of heavy-gauge boxed steel, this CNC plasma cutting machine can easily support large, thick industrial-sized sheets of metal.
  • Steel frame will remain straight and accurate over the years—unlike competing plasma tables with aluminum frames, which will warp from heat.
  • Ground, hardened, and polished square rails combined with linear orbital bearings add impressive strength to the machine.
  • Arrives pre-built at your shop, so you don’t have to spend hours putting it together and risk misalignment.
  • Choice of industrial downdraft system or water bath, removes dirt and debris from the table and your shop.
  • To get started just:
    • Uncrate the machine.
    • Add a plasma system, power, and a clean, dry air supply.
    • Hook up the exhaust.
  • Industrial plasma cutter Covered by a 1-year parts warranty.
  • We keep most replacement parts in stock for quick shipping.
  • You can depend on lifetime technical support by phone from our team of knowledgeable reps.

 

Plasma torch systems sold separately. We’ll let you choose the Thermal Dynamics Cutmaster model that works best for your application. This CNC plasma cutting machine is compatible with automatic torches, but not manual ones.

 

BobCAD-Cam Express Design Software (Included)

bobCad cam

The PT-44AHC comes standard with BobCAD-Cam Express programming software. You can design or plot out your project on any computer and load the plasma table via a USB drive.  To learn more or download a free trial, click the BobCAD-Cam logo above.

 

Questions? Call us at 1-920-684-4990 and talk to a Baileigh expert.

Read More Read Less

Specifications

Item Number PT-44AHC
Table Style Down Draft
Travel Speed 315 Inches Per Minute
Table Dimensions 59" x 64"
Table Load Capacity 1" Mild Steel
Capacity Depends on Plasma System Chosen
Drive Stepper Motor
Power 220V / 1-phase
Shipping Weight 3000lbs
Shipping Dimensions (Inches) 111x90x78

* specifications subject to change without notice.

California Proposition 65

California Proposition 65

Click HERE for More Information

Stories & Testimonials

Easy-to-Use Software and Helpful After-Sale Service

Nate Dallman of NPD Welding and Fabrication needed a quality tool to cut through thick plates of sheet metal, and the PT-44VH-A was the solution. Thanks to the UcanCam design software and Baileigh's unrivaled customer service, Nate no longer has to outsource his cutting jobs.

Read the full story

High-Quality Production and Profit Growth in Any Weather

Queen City Fabrication uses the PT-44VH to make everything from hot rod parts to ornamental art pieces. Co-owners Eddie Carlton and Josh Highley love the table's downdraft system, which keeps the air in their shop nice and clear even when they're holed up for those cold Ohio winters.

Read the full story

I can rely on Baileigh Industrial

My name is Dan Patterson and I started SBFI in 2005. It all started with my undergraduate art degree and a love for metal fabrication. It has evolved into a family business offering heirloom quality artisan metal products. Approaching the fabrication process from an arts perspective is all about making the materials do what they’re not supposed to do, and that has been one of the benchmarks of our business. Being able to handle a wide variety of design and fabrication challenges makes us unique, and my staff and I use everything from hammer and anvil to CNC machines to make it happen. Our success is predicated on being able to rapidly adapt from one job to another, and having tools and machinery that are versatile and reliable is critical to our survival. That is why whenever possible, I choose Baileigh Industrial metalworking machinery.

When I was recently asked to fabricate a complex geometric wall sculpture for a local business, I knew that Baileigh’s legendary precision would not only make this project possible, but profitable. I was able to use the PT-510HD plasma table to quickly fabricate some of the more complex segments while the RM-40 roll bender offered the precision repeatability that I needed for other sections. Moreover, the software package provided with the PT-510HD worked seamlessly with my existing design software so workflow was never adversely affected. Baileigh’s quality machinery has allowed us to pull off projects like this without batting an eye, and our business has seen tremendous growth as a result. I can rely on Baileigh Industrial to perform every time which not only takes the stress out of a complex fabrication problem, but makes the job a whole lot of fun. Thanks, Baileigh!

Dan Patterson - Santa Barbara Forge

PT-44AHC - CNC Plasma Table

SKU: 1019071

In stock

Regular Price: $18,095.00

Special Price $14,476.00 $

Now Includes Water Table Insert!
Leasing starts at $321 . Calculate your monthly lease price
SHARE PRINT Questions? 1-844-477-7707