Product image is only a representation, actual product appearance may differ slightly

  • BSB-127-10/14
  • BSB-127-10/14

8/12 TPI Band Saw Blade for BS-330 Series

SKU: BA9-1001931

In stock

$93.00 $

Questions? 1-844-477-7707


This 8/12 TPI saw blade is a perfect match for our BS-330 series. This is just one of the hundreds of blades that we carry.  If you have a special application, Call us at 1-920-684-4990 and talk to a Baileigh expert.

When you purchase a Baileigh Industrial Band Saw, there are a lot of things to consider. The most important element of a great cut is the blade. When cutting materials other than mild steel other variables come into play.  Not sure if the 8/12 TPI is right for you? Below is a brief guide to help you pick out the correct blade.

Picking the right blade:

Cutting mild steel or annealed material you would want no less than 3 teeth touching the material or no more than 24. The ideal amount of teeth touching the material at one time would be 6-12. When picking the correct tooth count you also want to consider the wall thickness too aggressive of a tooth count will cause the teeth to get caught in the sidewalls and you will break your teeth. Too fine of a tooth count will only cause a problem when you are cutting through the top or bottom of your material. This can cause premature blade wear or motor failure.

Conditions that will influence pitch selection:

  • Soft materials require fewer teeth and more gullet capacity.
  • Hard materials require more teeth to share in the work and fewer gullets.
  • Machine capabilities. Constant feed machines can use a coarser pitch. Gravity feed machines will require a finer pitch.

Please remember that there are Proper Techniques for All Types of Shapes.
Please consult a Baileigh Industrial Technician for help in choosing the correct blade for your application.


Premature and Excessive Tooth Wear

  • Feed pressure too light, increase it Lower band velocity
  • Improper tooth selection, use a finer pitch
  • Improper break-in with new band. Velocity and feeding should be reduced the first few cuts
  • Teeth are running the wrong direction. Be sure teeth are pointing in proper direction
  • Incorrect saw guide insert size for the band, allowing them to strike teeth 

Band Stalls in Work

  • Feed pressure too great - decrease feed 
  • Teeth too coarse, use finer tooth blade 

Blade Making Belly-Shaped Cuts

  • Increase tension 
  • Adjust guides closer to work piece 
  • Teeth too fine - use a coarse pitch 
  • Decrease feed force 
  • Teeth dull 


Item Number BSB-330-8/12
Included Accesories Included Accesories
Blade Size 13'5" x 1-3/8" x .042"
Shipping Weight 2 lbs
Tooth Count 8/12 TPI
Special Notes Blades are non-refundable, please call if you have questions about your application. 920-684-4990

* specifications subject to change without notice.

California Proposition 65

California Proposition 65

Click HERE for More Information

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 129.25ms
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 108.04ms
  • bvseo-msg: HTTP status code of 404 was returned;

Estimate shipping and tax for this item

  • Is Liftgate Needed?
    Is Residential Delivery?

    Above Checkboxes are related to the LTL Shipping estimates.