Baileigh Industrial Special Offers!
Baileigh Industrial is continually evaluating its stock and from time to time we get overstocks of some products and we need to move them. Below is a list of the products with the biggest discounts at this current time, but we have others as well. Those products can be found throughout our site, listed within their natural product catagories.
Baileigh Industrial is overstocked with our production ready cold saws and with more on the way we need to make room fast. There will not be a better time to buy than right now as we are offering them at a whopping 30% off for a limited time. Hurry supplies are limited!
-
BW-160M - 160A MIG Welder
Regular Price: $552.00
Special Price $441.60 $
In stock
- IGBT Inverter MIG welder
- Dual Voltage 120/230 Volt Single Phase
- Thermal overload protected
- Option of Gas/Gasless
-
BW-200S - 200A Stick (SMAW) Welder
Regular Price: $552.00
Special Price $441.60 $
In stock
- Portable IGBT Inverter stick welder
- Dual Voltage 110/220 Volt Single Phase
- Thermal overload protected
-
Combination Belt and Disk Grinder DBG-62
Regular Price: $835.00
Special Price $751.50 $
In stock
- 110V combination belt and disc grinder.
- 6" disc diameter.
- 2" x 40" abrasive belt.
-
Manual Slip Roll Machine SR-2420M
Regular Price: $795.00
Special Price $751.50 $
In stock
- 24” forming width
- 20 gauge mild steel capacity
- 3 wire grooves
- Benchtop model
-
Sheet Metal Corner Notcher SN-F16-FN
Regular Price: $892.00
Special Price $802.80 $
In stock
Foot Operated Corner Notcher. 16 Gauge Mild Steel Capacity. Will Notch Corners up to 3" x 3" at 90 Degrees. -
Straight Hand Brake - HBR-4820
Regular Price: $997.00
Special Price $897.30 $
In stock
- Manual sheet metal brake
- 20 gauge mild steel capacity
- 4-foot length
- Bends up to 120°
-
Beveling Machine CM-6
Regular Price: $1,045.00
Special Price $940.50 $
In stock
- 110V machine with 1.5 hp motor.
- Chamfers up to 6mm deep.
- Angles from 15° to 45°.
-
Metal Bench Press BP-3
Regular Price: $1,231.00
Special Price $984.80 $
In stock
- 3 ton maximum capacity
- 12" x 3.75" throat depth
- 3" stroke
- Includes stand
-
Bench Top Lathe - PL-714VS
Regular Price: $1,334.00
Special Price $1,067.20 $
In stock
- 13.8” between centers
- 100 to 2,500 rpm
- 110V 3/4 hp motor
- 7” swing
- .75” spindle bore
-
Portable Beveling Machine CM-10P
Regular Price: $1,334.00
Special Price $1,200.60 $
In stock
- 110V portable plate beveling machine.
- Bevels up to 10mm.
- Angles from 15° to 45°.
-
Two Wheel Belt Grinder - BG-248-2
Regular Price: $1,643.00
Special Price $1,314.40 $
In stock
- 2-wheel belt grinder.
- 2" x 48" belt.
- Platen, slack, & contact wheel grinding
- Pivoting head
- 110V
-
BW-200MP - 200A Multi-Process Welder
Regular Price: $1,746.00
Special Price $1,396.80 $
In stock
- Multi-function inverter MIG/Stick/TIG welder
- LCD screen
- Dual driving wire feeder
- Automatic dual voltage 120/230 volt 1 phase
-
BW-200T - 200A AC/DC Pulse TIG Welder
Regular Price: $1,849.00
Special Price $1,471.20 $
In stock
- 200A AC/DC pulse TIG welder
- IGBT inverter
- Remote adjusted
- Dual voltage 120/230 volt single phase
- Thermal overload protected
-
Electric Plate and Pipe Beveler CM-060PR
Regular Price: $3,085.00
Special Price $2,468.00 $
In stock
- Max Bevel Width 3/4"@45°
- Chamfer Angles from 0-60°
- 1.5HP
- 110V
-
Finger Brake BB-5014F
Regular Price: $3,446.00
Special Price $3,101.40 $
Call for Availability
- Manual box brake
- 14 gauge mild steel capacity
- 50" length
- Includes foot pedal for clamping
-
HLT-4400 Hydraulic Lift Table
Regular Price: $4,258.00
Special Price $3,406.40 $
In stock
- 4400 lbs. Capacity
- 63" x 39" Table
- Safety Interlocked
- 220V Single Phase
-
Lock Former Pittsburgh Machine LF-20
Regular Price: $3,852.00
Special Price $3,466.80 $
In stock
220 Volt Single Phase Lock Forming Machine. 20 Gauge Mild Steel Capacity. Uses ~1" Of Material to Create Lock. 5/16" to 3/8" Depth of Pocket. Speed of 25' Per Minute. Optional Rolls Available -
Roll Bender - R-M20-110
Regular Price: $4,766.00
Special Price $3,812.80 $
In stock
110V Ring and Angle Roll Bender, 2 Driven Rolls, Manual Top Roll, 1" Round Tube Capacity. Includes Stand, LED Readout, Foot Pedal and Emergency Stop. -
Roll Bender - R-M20-220
Regular Price: $4,766.00
Special Price $4,289.40 $
In stock
- 220V 3-phase ring roller.
- 1" round tube capacity.
- 3 rolls: 2 driven rolls, manual top roll.
- Includes floor stand and digital readout.
-
Drill Press DP-1500G
Regular Price: $4,969.00
Special Price $4,472.10 $
Call for Availability
- 220V 3-phase 3.5 hp motor.
- Gear-driven drill press.
- 1.5" mild steel drilling capacity.
- Variable speeds: 108 to 1800 rpm.
-
MDC-1200-HD Heavy Duty Metal Dust Collector
Regular Price: $5,476.00
Special Price $4,654.60 $
In stock
- Heavy duty metalworking dust collector
- 1.5 hp
- 1100 CFM
- Pulse clean filter cartridge system
- 110 volt
-
Welding Table WJT-4747-HD
Regular Price: $5,578.00
Special Price $5,020.20 $
In stock
- 47" x 47" Heavy Duty
- 250 Cast Iron Welding Table
- 5 Fixturing Surfaces
- Includes Legs
-
Sheet Metal Corner Notcher SN-F09-MS
Regular Price: $6,085.00
Special Price $5,476.50 $
Call for Availability
9 Gauge Hydraulic Fixed Angle Sheet Metal Notcher, 3 HP Motor, 220/440V 60 Hz 3Phase, 7-3/4" Blade Length, 50 Stokes per Minute, 27" x 23.5" Working Table -
Electronically Controlled Tapping Arm ETM-32-1500
Regular Price: $8,521.00
Special Price $6,816.80 $
In stock
- Variable Speed
- 1/8"-1-1/4" Tap Capacity
- 59" Work Range
- 220V Single Phase
-
MDC-3500-HD Heavy Duty Metal Dust Collector
Regular Price: $8,115.00
Special Price $6,897.75 $
Call for Availability
- Heavy duty metalworking dust collector
- 5 hp
- 2340 CFM
- Pulse clean filter cartridge system
- 220V three phase