The CS-225M cold cut saw from Baileigh industrial is the perfect saw for any shop that has the need for a light production or portable saw that still provides great mill like cuts. Cold cut saws are great for cutting tubing, pipe, angle iron, solids and much more and the CS-225M is no exception. It has a 9’ blade that allows for a maximum of 2-1/2” round capacity at 90 degrees and has the ability to miter 45 degrees to the left The CS-225M has a 1hp motor, powered by 110 volts, that spins at an optimal 50 rpm for cutting many different kinds of materials.
This bench top saw is filled with great features only found on more expensive saws; such as a self centering vice that grips the material on both sides of the blade for extra support during the cutting process. For even more strength, the direct drive gear box on the CS-225M is encased in a fully machined cast iron housing, to ensure proper alignment and long life. The CS-225M also has a heavy duty base that double as a coolant reservoir for its flood coolant system. The pump on this system is a mechanical type that requires less maintenance than other style pumps. An integrated stop rod is also included to help with repeatability when doing small production runs.
The best part of the CS-225M is that it is typically in stock for fast deliveries. For more information on the CS-225M or any of the other Baileigh Industrial cold saws contact a representative today.
|Max. Blade Diameter||9"|
|Round Solid at 45°||1.5"|
|Square Tube at 45°||2" x 2"|
|Round Tube at 45°||2.125"|
|Round Solid at 90°||1.75"|
|Square Tube at 90°||2.25" x 2.25"|
|Round Tube at 90°||2.5"|
|Vice Style||Dual Action, Self Centering|
|Max. Vice Opening||2.75"|
|Blade Speed||50 rpm|
|Shipping Weight||187 lbs.|
|Shipping Dimensions||28" x 20" x 25"|
* specifications subject to change without notice.